No matter what machines you run, there are High Pressure Grease Fitting manufacturer that cause problems. Maybe they’re buried deep behind a metal shield, so gunked up you can’t even find them, or it’s a U-joint that you can’t get into without endless shifting and shuffling to get that angle just right.

This coupler is built for recessed grease fittings. With almost 4 inches of reach, this will get at even the deepest fittings in axles, U joints, harvester heads and shielded PTO shafts. While it won’t solve the problem of fittings that require a 90-degree adaptor to reach, it will give you the same confidence that grease is going in, not on, your machine. This means no more fighting to *** the coupler off to the side to get it to release from a fitting in a hole somewhere. Simply push down on the thumb lever and move on to the next grease fitting.

The Angled Grease Fitting

We’ve all been through greasing those tough fittings without questioning if it’s the grease fitting, and not the greasing equipment, that should change. Oftentimes the easiest and cheapest solution is to swap out a straight grease fitting for a 45° or 90° grease fitting to make those tight spots easier to reach.

The Remote Access Hose

If an angled grease fitting isn’t enough of a change to make a fitting easy to reach, we create our own hose adaptors to bring the grease fitting away from the machine and out from behind metal shields or tight angles. Remove the existing grease fitting, *** in a length of grease hose to the fitting, and add a female grease fitting on the other end of the grease hose. Now you have an easy-to-reach grease fitting that feeds into those tight spots.

The Grease Injector Needle

We’re all about leak-free options for greasing, so the injector needle isn’t our first choice. However, some of our customers prefer needles to get at really tight fittings. If you know how to use them, you can do pretty clean work too.

We are a waterproof company, offers Brass Injection Packers,Injection Pump,Injection Packers, Polyurethane injection grouting and so on, Please contact us anytime.