The print labels supplier pointed out that label design emphasizes a sense of integrity, especially for designers who need to have a grasp. From the label’s folio, font selection to the changes of catalogue and format, from the arrangement of pictures to the setting of colors, from the selection of materials to the innovation of printing technology, it is necessary to make overall consideration and planning, and then reasonably mobilize all design elements to organically integrate them and serve the connotation. The material of the label has also changed a lot, such as bamboo slips, plates, etc. This is also a new breakthrough in the form of expression of the label, and the resulting is also a new typesetting method. Due to the different forms of expression, its content should also have corresponding changes.

Take a section of sample paper that has passed the above-mentioned inspection, peel it off the base paper and check again whether there are cracks on the top paper and the base paper, because cracks are sometimes very small and can only be found after separating the base paper and the base paper. It is worth noting that the ink and adhesive will gradually accumulate on the paper guide roller of the printer during the printing process, which will also cause the edge of the label material to ***. Check whether the edges of unlabeled materials are adhered or not, and whether the backing paper is coated with silicon. Adhesion at the edge of label material or silicone oil leakage in some areas on the base paper will cause the surface paper to break when waste is discharged during printing process and cannot be produced normally.

The in mould labels is also one of our product, welcome to buy and purchase!