There are many kinds of situations when using water treatment equipment in daily life. How to maintain it? When the water output of the device drops, the salt transmission in the water will be doubled in reverse. So, how to master the application skills of Ro System Component(KOKOELECTRIC)?

1. Pump clean, free chlorine-free ro system component water from the cleaning tank (or corresponding water source) into the pressure vessel and drain for several minutes.

2. Use clean product water to prepare a cleaning solution in the cleaning tank (different cleaning solutions are required for different membranes).

3. Circulate the cleaning solution in the pressure vessel for 1 hour or preset time.

4. After cleaning is completed, drain the cleaning tank and wash it, then fill the cleaning tank with clean product water for further washing.

5. Pump clean, free chlorine-free product water from the cleaning tank (or corresponding water source) into the pressure vessel and drain for several minutes.

6. After flushing the ro system component, run the reverse osmosis system with the product water discharge valve open until the product water is clean, free of foam or detergent (usually 15-30 minutes).

If you are interested in our products, you can click Ro Spare Parts to learn more information.