The paint remover for Enameled Copper Wire is mainly used to remove the paint from the copper wire. As long as the enameled copper wire is put into the paint remover for 0.5 to 1 second, and then naturally dried in the air for 20 to 30 seconds, the paint will fall off, thus the removal speed is very fast. Lacquer remover for enameled wire is a milky and sticky object, which has no corrosivity to the copper wire itself and has a small smell. It can be used centering and safely, but there are also many problems needing attention when using enamel remover for enameled wire.

Application of Paint Remover for Enameled Copper Wire

1. The enameled wire is immersed in the enameled wire stripping tank for 5 seconds to 1 minute (according to the temperature resistance level of the enameled wire). The enameled wire is taken out and placed in the air for the natural reaction. The insulation layer of the enameled wire will naturally swell and peel off in about 20 seconds. If necessary, the enameled layer can be coated with cloth or rubber gloves to improve power. After the paint film falls, the film and residual paint remover shall be washed clean with water in time.

2. It is recommended to soak enameled wires with a temperature resistance of 180 degrees or more for a long time (10 minutes or more). After the paint film falls, the paint film and residual paint remover shall be washed clean with water in time.

Use Precautions

1. Enameled wire paint remover need not be diluted, direct use of the stock solution, when operating to wear a hat, mask, latex gloves, gently take slow operation, to prevent liquid splash into the eyes or skin, if accidentally splashed, to timely wash with a lot of water and go to a doctor.

2. Paint remover should be fully stirred before use, and slowly poured into the paint removal tank.

3. For enameled wires and small objects with disordered structure and shape, they can be directly soaked in the paint removal tank, left standing for about 1 minute and taken out. The bright bottom layer can be exposed after being prevented for about 30 seconds in the air.

4. For larger objects, the paint can be removed by alteration.

5. The specific time of paint removal shall be determined according to the thickness and quality of the paint, and the operator shall determine the time of paint removal according to the specific situation.

For more product details, please click on our official website: https://www.xinyu-enameledwire.com/